Sam4s SPS-500, Руководство оператора

Страница: 43 / 141

SAM4s SPS-500 Operator Manual v1.2 Basic Operations

43
Auto Tare Weight
1. Place the item on the scale.
2. Press or touch the
SCALE
key to display the weight.
3. Register the open or preset PLU.
Manual Tare Weight Entry
1. Place the item on the scale.
2. Enter the tare # and press or touch the
SCALE
key to display the weight less the tare.
3. Register the open or preset PLU.
Open Tare Weight Entry
1. Place the item on the scale.
2. Press or touch
20
. This will call for tare 20, which is an open tare.
3. Press or touch the
SCALE
4. Press or touch the decimal [.], then the numeric
3
. This will enter a tare weight of 0.3 lb.
5. Press or touch the
SCALE
key.
6. Register the open or preset PLU.
Print Key
The
PRINT
key allows the operator to send items to the kitchen printer. Use the
PRINT
key (or label the
key GRILL) to send items wouldn't normally go to a kitchen printer or send items that require special
attention. All printer output made using the key is in addition to regular output.
To use the
PRINT
key function, press or touch the
PRINT
key before the first item and immediately after the
last item to want printed for special attention.
1. Press or touch
PRINT
.
2. Enter the item and condiments or instructions.
3. Press or touch the
PRINT
key again to send the item & instructions to the printer identified on the
PRINT
key.
Note: The PLU Status Group flag #28 “Print on KP?” must be set to Y (yes) for items that are to be
sent to a printer via the PRINT key.
The PRINT key also sends items in group sequence using the “meal order feature”. Items are given a meal
order priority through group programming. Each time the PRINT key is pressed/touched, the next priority of
items will be release to the kitchen printer.