manualshive.com logo in svg

Sam4s SPS-500, Руководство оператора

Поделиться
Скачать
Sam4s SPS-500 Скачать руководство пользователя страница 32

32  

  Getting Started 

SAM4s SPS-500 Operator Manual v1.2 

INPUT QTY 

Quantity input is required for a condiment WLU 

KITCHEN PRINTER FAILURE  

The kitchen printer has failed to respond.  Printing has been re-routed to the designated back-up printer is 
programmed. 

MANAGER OVERRIDE REQUIRED  

The manager password must be input in order to override a HALO amount, or other restriction. 

MANAGER REQUIRED 

The manager password must be input to complete this operation. 

MEMORY FULL  

Memory is full. 

NEGATIVE  

This sale has gone negative.  Negative sales are programmed as not allowed. 

NO CHECK #  

This message appears when the system cannot find this guest check number. 

NO DATA  

PLU can not be found (does not appear in Register Mode).  Usually associated with stock entry on an IRC 
system when the PLU exists in one terminal but not another.  On the terminal where the PLU does not 
exist the message not found will appear. 

NO DRAWER!  

The employee currently signed on is not assigned to a drawer, and is not allowed to perform cash sales, or 
the drawer is no longer attached and is required in order to continue. 

NO MANUAL ENTRY 

Manual entry is not allowed (scale function). 

NO PAPER  

Slip printer is out of paper, appears when printing to a loose-leaf printer. 

NO PLU! 

The number entered is not a valid PLU.  This message will also appear if a PLU number “built” using 
modifier keys recalls an invalid PLU number. 

NONADD# REQUIRED 

This operation requires the entry of a Non-Add number to fulfill the compulsory requirements. 

NOT DISCOUNTABLE 

The preceding entry is not discountable, product is not available for discounting. 

NOT PROGRAMMED!  

This key has not been programmed 

Содержание SPS-500














































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды