142 • Program Mode Programming
SAM4S NR-500 Series Manual
CHECK #
CHECK # Key Program Notes
Option Entry
Description
DESC Alpha
numeric
24 character
You can program a unique descriptor. The default
descriptor is CHKTRACK.
KEY DISABLE
Y or N
Select
Y
to disable this function.
COMPULSORY
FOR ALL SALES
Y or N
Select
Y
you must begin a new, or recall an existing
tracking number before registering items.
OPENING
CLERK HAS
EXCLUSIVE
ACCESS
Y or N
If
Y
, the clerk that begins a tracking number is the only
clerk who can recall a check. If
N
, any clerk can recall
any check.
PRINT ON
RECEIPT
Y or N
If
N
, the check track number and balance will not print on
the receipt.
PRINT CHECK
ON RP
Y or N
If
N
, the check track number and balance will not print on
the remote.
ALLOW ONLY
ONE CHK PER
TABLE
Y or N
If
Y
, you can begin only one check with the same table #.
CHECK #
ASSIGNED BY
REGISTER
Y or N
If
Y
, press the
CHECK. #
key to automatically assign the
next sequential check. Check numbers will begin with #1
and continue until the open check report is reset, at which
point the check number will be reset and start from #1
again.
PBAL IS USED
D/THRU
RECALL
Y or N
If you wish to implement a drive thru recall key, this setting
changes the function of the
PBAL
key to that of a recall
key. Press the
PBAL
key directly to automatically recall
the open check with the lowest tracking number
LENGTH OF
CHECK
0-9
Set the length of check in number of digits. For example,
if 4, then checks must be used in the range from 1000, to
9999. This setting applies to only check numbers input by
the operator, not to check numbers assigned by the register.
