background image

ER-390 Series 

Operating Instructions   

  47 

Coupon on Item (Store Coupon) 

When programmed as "amount", "item", "open" and "negative", a 

%

 key will perform a coupon 

against an item (or store coupon.)  In this case, you must press the PLU (or enter the PLU 
number) of the PLU you wish the coupon to be subtracted from.   

 

1.  Register the items you wish to sell. 

2.  Enter the amount of the coupon, and then 

press the appropriate %

 

key.  For 

example: 
 

0

2

0

% 1

 

3.  Press the PLU key you wish to subtract 

the coupon from (or enter the PLU 
number of the PLU you wish to subtract 
the coupon from and press 

PLU

.)   

 

1

 

4.  The coupon is automatically subtracted.   

 

THANK-YOU 

CALL AGAIN 

 

DATE 01/15/2003 WED   TIME 

08:33 

 

PLU1                          

£10.00 

PLU1 C                         -

2.00 

TOTAL                          

£8.00 

CASH                           

£8.00 

CLERK 1        No.000011      

00001 

Содержание ER-390 SERIES















































































































































































































Отзывы: