Sam4s ER-180T, Руководство по обслуживанию

Страница: 23 / 65

3. Installation and Operation
SAM4S ER-180T SERIES 3-13
3-2 Operation
3-2-4 All Clear
This step insures that the cash register is cleared of any totals or programming. After this procedure, the cash
register is ready for programming and operation.
WARNING:This is a one time procedure. Do not repeat this procedure after the cash register is
WARNING: programmed, it causes all programs and totals to be erased and to be default.
1.
Unplug the register.
2. Turn the control lock to the S position.
3. Press and hold the key position where the “A” key is located on the default keyboard layout.
4. Continue to hold the “A” key while plugging the register into a power source.
5. Press the upper left key of the keyboard, then the lower left key, then the upper right key, and finally
press the lower right key.
Figure3-4. All Clear Key Sequence & Print Sheet
02/23/2010 TUE 08:47
= = = = = = = = = = = = = = = = = = =
RAM ALL CLEAR OK !
= = = = = = = = = = = = = = = = = == =
RAM 1Mbits OK
ER-180T EPROM INFO.
VERSION : STD 01.000
CHECKSUM : 2DEB
FEB 23 2009
CLERK 00 000001 00000