Sam SAM-III Скачать руководство пользователя страница 82 | Manualshive

Страница: 82 / 82

background image

SAM-III Construction Manual

See last page for document and copyright information, File: SAM-III Magnetometer Construction.doc, Page 80

Document History

Author:

Whitham D. Reeve, Anchorage, AK USA

Copyright:

© 2010 ~ 2018 W.D. Reeve

Revision history:

Iss. 0.0 (Initial draft started, June 11, 2010)

Iss. 0.1 (Additional edits, July 9, 2010)

Iss. 0.2 (Added serial port troubleshooting, July 21, 2010)

Iss. 0.3 (Many edits from construction, July 25, 2010)

Iss. 1.0 (Issued for publication, August 4, 2010)

Iss. 1.1 (Update enclosure section, August 8, 2010)

Iss. 1.2 (Minor edits, August 20, 2010)

Iss. 1.3 (Edit coordinate systems, October 27, 2010)

Iss. 1.4 (Add crosstalk and temp. sensor info, November 10, 2010)

Iss. 1.5 (Add sensor info, correct analog out function, January 29, 2011)

Iss. 1.6 (Minor edits, add circuit description, July 2, 2011)

Iss. 1.7 (Add scope screenshots, July 5, 2011)

Iss. 1.8 (Minor edits, 18 March 2012)

Iss. 1.9 (Updates, 19 December 2012)

Iss. 2.0 (Updated drawings, clarifications, 11 Sep 2014)

Iss. 2.1 (Testing clarifications and updated sensor installation, 25 Apr 2016)

Iss. 2.2 (Added images of completed PCB, 06 May 2016)

Iss. 2.3 (Completed reformat, 11 Jun 2016)

Iss. 2.4 (Added connector contact images, 17 Jun 2016)

Iss. 2.5 (Minor edits, 02 Jul 2016)

Iss. 2.6 (Clarified latching power header, 20 Sep 2017)

Iss. 2.7 (Corrected power header dwg, 11 Jan 2018)

Iss. 2.8 (Added to tips lead-free solder, deleted broken links, misc., 16 Feb 2021)

Note: The basic contents of this construction manual, including SAM logos, were provided by the
original designers and used with their permission. Portions of the manual were translated from German.
Please let us know if you find errors – send an email to [email protected] with “SAM Kit” in the
subject line (or else your email may be caught by our spam filters).

Total word count: 19312
File size: 14111232B

«
...
80
81
82

Содержание SAM-III



















































































Отзывы:

Нет отзывов

Похожие инструкции для SAM-III

Бренд: Omicron Lab Страницы: 33

Бренд: Omicron Lab Страницы: 21

Бренд: Omicron Lab Страницы: 22

Бренд: Vectornav Страницы: 114

Бренд: Unior Страницы: 2

Бренд: Vaisala Страницы: 83

Бренд: Hama Страницы: 16

Бренд: Tire-Safeguard Страницы: 6

Бренд: SecureAlert, Inc. Страницы: 7

Бренд: GANN Страницы: 89

Бренд: U.S. Solid Страницы: 30

OMCL-AC240TS-R3

Бренд: Olympus Страницы: 3

Бренд: PASCO Страницы: 4

Бренд: Interacoustics Страницы: 54

Бренд: PCB Piezotronics Страницы: 10

Бренд: Jaquet Страницы: 27

Бренд: Elcontrol Страницы: 7

Бренд: CryptOn Страницы: 13

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды