IQFDA31
Operation Using the RollCall Control Panel
Issue 1 Rev 1
Page 12
© 2016 SAM
5
Operation Using the RollCall Control Panel
5.1 Information Window
The Information Window is displayed in the upper-right corner of each screen and displays
basic information about the input and output status of the module.
5.1.1 Unit Status
The Unit Status pane provides basic information about the status of the video inputs, video
outputs, product settings, and status.
5.1.2 SFP Status
Note:
The IQFDA31 will dynamically configure itself depending on rear and SFP options. The
RollCall control panel will change to reflect the current product configuration.
The screens shown in this section are for guidance and reference only, and may be slightly
different to those on your module.
Name
Description
IN1:
IN2:
Displays the status of Input 1 and Input 2, the detected
rate, and whether the signal is locked or in bypass mode. If
no valid input is detected, asterisks (**) are displayed.
OUT:
The first line represents the outputs (1–4). The second line
is character aligned with the first and indicates the input
routed to that output. If no valid input signal is detected for
the output, an E is displayed.
Name
Description
Type:
Shows the type of SFP installed. This is supplemented
with a simple report for each SFP.
Status:
Shows the operational status of the SFP.
Connector:
Shows the physical connector type, for example, Fiber LC.