IQDMX30/IQDMX31
Technical Specification
Issue 2 Rev 5
Page 12
© 2015 SAM
User Memories
16x Save, Recall, Rename
Memory Naming
User configurable naming of memories 1 - 16
Information Window
Video Input Status, Audio Input Status
Factory Default
Resets all module settings to factory specified default values and clears
memories
Default Settings
Resets all module settings to factory specified defaults but does not clear
memories
Restart
Software restart of the module
Module Information
Reports following module information: Software version, Serial number, Build
number, KOS version, Firmware version, PCB version
Specifications
Electrical
3 Gbit/s SDI, SMPTE 424M
1.5 Gbit/s HD-SDI, SMPTE 292M
270 Mbit/s SDI, SMPTE 259M-C / DVB-ASI
Connector / Format
BNC/ 75 Ohm panel jack on standard S&W connector panel
Return loss
>-15 dB (270 Mbit/s, 1.5 Gbit/s)
>-10 dB (3 Gbit/s)
Output Jitter
SD-SDI 0.2 UI (10 Hz) / 0.2 UI (1 kHz)
3G/HD-SDI 1.0 UI (10 Hz) / 0.2 UI (100 kHz)
Video Standards
1125(1080)/50p (A & B), 1125(1080)/59p (A & B),
750(720)/50p, 750(720)/59p,
1125(1080)/25i, 1125(1080)/29i,
625(576)/25i, 525(480)/29i
Typical Video Delay
Typical delay (input lock with Dolby E alignment off): 2 lines
Typical delay (input lock with Dolby E alignment on): 1 frame
Embedded Audio Handling
HD - 24-bit synchronous 48 kHz to SMPTE 299M
SD - 20-bit synchronous 48 kHz to SMPTE 272M-A
Embedded Audio Delay
Minimum (PCM) 2 ms
Maximum (non-PCM)
SD: 67 µs
HD: 28 µs
3G-A: 15 µs
3G-B: 25 µs
Digital Audio Input (Balanced)
Connector / Format
25 W D
Level
3 V p-p typical into 110 Ohms
Standard
AES3, SMPTE 272M A-1994, SMPTE 299M
Digital Audio Input (Unbalanced)
Connector/Format
BNC
Level
1 V p-p typical into 75 Ohms
Standard
AES3id, SMPTE 272M A-1994, SMPTE 299M
Power Consumption
Module Power Consumption
9.5 W max (A Frames)
8.5 PR (B Frames)
