8
Basic rules for more safety
Important safety instructions
Please read these operating instructions and safety instructions carefully before
operating your grain mill.
This will help you avoid mistakes and accidents, and you will use the device safely
and functionally.
Please keep the instruction manual and pass it on to any user of the product after
you.
When using this grain mill, the following precautions and
safety instructions must be observed:
1.
Read all instructions carefully.
2.
The equipment may only be used for its intended purpose (production of
flour and meal).
3.
The device must not be used outdoors.
4.
Before putting the device into operation, it is important to make sure that the
device is in perfect condition and to check for defective cables, brittle
insulation, damaged housing. If the power cord or other components of the
mill are damaged, it must be replaced by the manufacturer or a qualified
person authorized to do so.
5.
Repairs may only be carried out by persons authorized by Agrisan GmbH.
6.
Defective or defective electrical equipment must not be put into operation.
7.
Report defects to the seller immediately.
8.
Connect your mill only to a properly installed power outlet. Please check that
the voltage indicated on the nameplate of the grain mill corresponds to that of
the mains supply.
9.
Sockets and extension cords must not be overloaded.
10.
The cable of the mill must not hang over an edge from the table or
work surface. Contact with stove tops or other hot surfaces must be
strictly avoided.
11.
Do not lay or crush supply lines to electrical devices over sharp edges,
corners and moving parts.
12.
Operate equipment only with the designated switch.
Содержание MT 18 D
Страница 27: ...27...
