SALZBURGER GETREIDEMÜHLE MT 5, Руководство владельца и руководство пользователя

Страница: 16 / 28

16
At a standstill:
Provided there are no grain kernels between the millstones, any adjustment can
be carried out
– even when the mill is at a standstill. With the mill turned on fill
the grain into the hopper.
When the mill is switched off and with a full hopper no finer re-adjustment
should be carried out. The grain, which has not yet been processed and is still
between the millstones, will become wedged. This can cause problems when re-
starting the mill.
During the milling process:
During the milling process re-adjustment from fine to coarse and vice versa
is possible. Re-
set from coarse to fine “ slowly ” in order to give the mill time
to process the grain which is between the stones. If you do the re-
adjustment too quickly the stones could become blocked.
Coarse Setting
The coarsest setting for producing grits is set by turning the adjustment screw
from fine to coarse by giving about 1 turn in the anti-clockwise direction. You
can open the milling stones so far that the corn will come out of the funnel
again.
Continual re-adjustment is possible between these two steps.