HardyTest D400
8.2 TKM Link
!
!
Now after installing the driver for the HardyTest D400 you may transfer your saved
measurements. Go again on the CD and start
TKM Link
. You can also first copy the
application on your hard disk and start it from there. And additional installation is not
necessary. You will see following window.
!
The left column shows all groups of measurements the mid one shows the measurements
included in every group and the right one shows all possible commands.
!
!
Get data: This command transfers the data from the gauge to the PC.
!
!
Open: With
Open
you can open old transmissions which were saved on the PC.
!
!
Save: The command „Save“ will be executed.
!
!
Save as: The command „Save as „ will be executed.
!
!
Full protocol: All groups of measurements will be exported to an Microsoft Word file (if MS
Word is installed on the pc)
!
!
Array protocols: Just the selected group of measurements will be exported to an Microsoft
Word file.
!
!
Exit: Exit
TKM Link
.
Page
?
of
?
22
22
