HardyTest D400
8. Software
!
!
In case that it should be necessary to transfer the saved data from your HardyTest D400 to
an PC we included the software TKM Link to the delivery. In order to install the software
under Windows carry out following instructions.
!
!
8.1 Installation of the Hardware Driver
!
!
First of all it is necessary to install the hardware driver for the HardyTest D400.
!
!
1. Insert the CD and open the volume.
!
2. Open the folder
Driver
and run
NDT DriverSetup
.
!
3. Carry out the instructions and reset the PC after finishing the installation.
!
4. After reseting connect the HardyTest D400 with the included USB adapter to the PC.
Windows will show you that it is installing the hardware driver.
!
5. After Windows finishes that process the driver is installed.
!
!
Note
: To check the right installation you may go on „System Control“ and on the „Device
Manager“ section there. In the section „COM & LTP“
NDT_Device_MP
should be listed.
!
!
Page
?
of
?
21
22
