Introduction
Thanks for choosing the Salusfin wireless motion sensor of the home security device.
This sensor is a Z-Wave TM enabled device (interoperable, two-way RF mesh
networking technology) and is fully compatible with any Z-Wave TM enabled
network. Every mains powered Z-Wave TM enabled device acts as a signal repeater
and multiple devices result in more possible transmission routes which helps
eliminate “RF dead
-
spots”. Z
-Wave TM enabled device displaying the Z-Wave TM
logo can also be used with it regardless of the manufacturer, and ours can also be
used in other manufacturer’s Z
-Wave TM enabled networks. This sensor monitors
movement, and send Z-Wave TM signal when movement is detected inside the
building.
Product Description and S pecification
*** For indoor use only***
Operation
1.
Walk in front of ZP3102, sensor will send the status of “ON” (Basic Set,
Value:0xFF) to any associated nodes, and the LED will flash once.
2.
If no movement detected in three minutes after sent status of “ON”, the sensor
will send the status of “OFF” (Basic Set,Value:0x00) to any associated nodes
3.
Normal operation, the LED will not light.
4.
The ZP3102 sensor equipped with tamper switch. If the cover of sensor is
removed, the PIR sensor will send an alarm report (type:01, level:11) to the
Содержание S F 9250
Страница 1: ...Motion Sensor S F 9250 User Manual...
