Saluki TAM4000 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 33

Saluki TAM4000 Скачать руководство пользователя страница 7

Tel: 886.909 602 109 Email: [email protected]

www.salukitec.com

7

2 Brief Introduction of the Transmitter

2.1 Basic Structure

2.2 Transmitter instrument panel and function profile

The transmitter is one of the core of this set of instruments. Its function is complete,

intelligent degree is high, operation is simple.

2.2.1 Panel profile

Note: see the figure above.

①

on/off button

②

output port

③

display screen

④

Frequency compound button

⑤

Power adjustment compound button

⑥

Menu compound button

⑦

charging port

2.2.2 Function introduction

①

Off/On Button: A self-locking switch

；

Pressing the on/off button turns the transmitter on or off.

②

Output Port: A multi-core dedicated socket which is used to change the output

mode. Plugging the connection lead into the output socket is the direct connection
mode. Plugging the clamp into the port is the clamp mode. No connection accessories
are plugged into the port is the induction mode.

③

display screen: Display the required basic information.

④

Frequency compound button: This button is the point dynamic soft switch;

The frequency of an output signal can be changed at one time; The startup is 577Hz.
In induction mode, the initial is 8KHz. In the frequency setting menu interface, press
this button to select or cancel the frequencies covered by the strip; When the
multi-frequency mode is set, press this button to choose to replace the output
frequency channel.

«
...
5
6
7
8
9
...
»

Содержание TAM4000


































Отзывы:

Нет отзывов