background image

 

15 

 

PLEASE AFFIX YOUR PROOF OF PURCHASE/RECEIPT HERE 

IN THE EVENT OF A CLAIM UNDER WARRANTY THIS RECEIPT MUST BE 

PRODUCED. 

 

W A R R A N T Y 

 

1. 

Tedelex  Trading  (Pty)  Limited  (“Tedelex”)  warrants  to  the  original  purchaser  of  this  product 
(“the  customer”)  that  this  product  will  be  free  of  defects  in  quality  and  workmanship  which 

under normal personal, family or household use and purpose may manifest within a period of 1 
(one) year from the date of purchase (“warranty period”).  

2.  Where  the  customer  has  purchased  a  product  and  it  breaks,  is  defective  or  does  not  work 

properly  for  the  intended  purpose,  the  customer  must  notify  the  supplier  from  whom  the 
customer  bought  the  product (“the  supplier”)  thereof  within the  warranty  period.  Any  claim  in 

terms  of  this  warranty  must  be  supported by  a  proof of  purchase.   If proof  of purchase  is  not 

available, then repair, and/or service charges may be payable by the customer to the supplier.   

3.  The faulty product must be taken to the supplier's service centre to exercise the warranty. 

4.  The  supplier  will  refund,  repair  or  exchange  the  product  in  terms  of  this  warranty  subject  to 

legislative requirements. This warranty shall be valid only where the customer has not broken 

the product himself, or used the product for something that it is not supposed to be used for. 

The warranty does not include and will not be construed to cover products damaged as a result 

of disaster, misuse, tamper, abuse or any unauthorised modification or repair of the product.  

5.  This  warranty  will  extend  only  to  the  product  provided  at  the  date  of  the  purchase  and not  to 

any expendables attached or installed by the customer. 

6.  If the customer requests that the supplier repairs the product and the product breaks or fails to 

work properly within 3 (three) months of the repair and not as a result of misuse, tampering or 

modification by or on behalf of the customer, then the supplier may replace the product or pay 

a refund to the customer.  

7.  The  customer  may  be  responsible  for  certain  costs  where  products  returned  are  not  in  the 

original packaging, or if the packaging is damaged. This will be deducted from any refund paid 

to the customer. 

 

TEDELEX TRADING (PTY) LTD (JOHANNESBURG) 

 

JOHANNESBURG  

 

 

 

 

 

TEL NO. (011) 490-9000 

CAPE  TOWN 

 

 

 

 

 

 

TEL NO. (021) 552-5161 

DURBAN 

 

 

 

 

 

 

TEL NO. (031) 792-6000 

 

www.amap.co.za

 

 

Содержание SOD 12
















Отзывы: