Salton SI70, Инструкция по эксплуатации

Страница: 7 / 10


Never use any abrasives to clean the soleplate.

Keep the soleplate smooth; avoid contact with metal objects.
STORAGE

Turn the temperature control to OFF/MIN and set the steam control knob OFF.

Disconnect the iron from the wall outlet.

Pour any remaining water out of the water tank.

Stand the iron upright and let it cool down completely.

Always store the iron in an upright position.
SAFETY PROTECTIVE CUT-OUT
In the unlikely event of the thermostat failing, the protection cut-out will operate to prevent
the iron overheating.
The iron should then be taken to the nearest authorized service facility.
SERVICING THE APPLIANCE
There are no user serviceable parts in this appliance. If the unit is not operating correctly,
please check the following:

You have followed the instructions correctly

That the unit has been wired correctly and that the wall socket is switched on.

That the mains power supply is ON.

That the plug is firmly in the mains socket.
If the iron still does not work after checking the above:
- Consult the retailer for possible repair or replacement. If the retailer fails to resolve the
problem and you need to return the iron, make sure that:

The unit is packed carefully back into its original packaging.

Proof of purchase is attached.

A reason is provided for why it is being returned.
If the supply cord is damaged, it must be replaced by the manufacturer or an authorised
service agent, in order to avoid any hazard. If service becomes necessary within the
warranty period, the appliance should be returned to an approved Tedelex Trading (Pty)
CHANGING THE PLUG
Should the need arise to change the fitted plug, follow the instructions below.
This unit is designed to operate on the stated current only. Connecting to other
power sources may damage the appliance. Connect a three-pin plug as follows:
The wires in this mains lead are
coloured in accordance with the
following code:

Green/Yellow = Earth

Blue = Neutral