Salton SI70, Инструкция по эксплуатации

Страница: 3 / 10

19. Use of an extension cord with this iron is not recommended. However, if it is
necessary to use an extension lead, ensure that the lead is suited to the power
consumption of the iron to avoid overheating of the extension cord, the iron or plug
point. Do not place the extension cord in a position where it can be pulled on by
children or animals or tripped over.
20. This iron is not suitable for outdoor use. Do not use this appliance for anything other
than its intended use.
21. DO NOT carry the iron by the power cord.
22. Do not leave this iron unattended during use. Always unplug the unit when not in use
or before cleaning.
23. The plug must be removed from the socket-outlet before the water reservoir is filled
with water.
24. The filling aperture must not be opened during use.
25. Always operate the iron on a smooth, even and stable surface. Do not place the unit
on a hot surface.
26. When placing the iron in an upright position, ensure that the surface on which the iron
is placed is stable.
27.
Ensure that the switch is in the “Off” position after each use.
28. The manufacturer does not accept responsibility for any damage or injury caused by
improper or incorrect use, or for repairs carried out by unauthorised personnel.
29. In case of technical problems, switch off the machine and do not attempt to repair it
yourself. Return the iron to an authorised service facility for examination, adjustment
or repair. Always insist on the use of original spare parts. Failure to comply with the
abovementioned precautions and instructions, could affect the safe operation of this
machine.
30. When you have finished ironing or when you are leaving the iron unattended:
a. set the steam knob (C) OFF and the Temperature Control Dial to OFF/MIN.
b. put the iron in an upright position.
c. unplug the iron from the wall outlet.
31. Do not touch hot metal parts, hot water or steam. These parts become hot and may
cause burns. Take care if you turn the iron upside down: there may be hot water in the
tank.
32. The plug and cord should not be allowed to touch the hot soleplate. Let the iron cool
down completely before taking it away.