3
surface.
30.
Ensure that the switch is in the “Off” position after each use.
31. The manufacturer does not accept responsibility for any damage or injury caused by improper or
incorrect use, or for repairs carried out by unauthorised personnel.
32. In case of technical problems, switch off the appliance and do not attempt to repair it yourself.
Return the appliance to an authorised service facility for examination, adjustment or repair. Always
insist on the use of original spare parts. Failure to comply with the above mentioned pre-cautions and
instructions, could affect the safe operation of this appliance.
33. Take care when pouring
– pour slowly, and don’t over-tilt the kettle.
34. Wind excess cable beneath the base.
35. Check that the lid is fully closed before switching the kettle on - otherwise it may not switch off.
36. Check if the kettle is properly located on the base before switching on.
37. Do not switch on unless the kettle contains at least 2 cups of water.
38. Remove the kettle from its base before filling or pouring.
39. This appliance must not be operated by an external timer or remote control system.
40. Do not put the kettle or its base on a wet place/surface or in water
– do not operate it with wet
hands.
41.
Don’t boil any tea directly in this water kettle.
BEFORE FIRST USE
Carefully remove your kettle from the box. You may wish to retain the packaging for further use.
Before first use, fill the kettle with cold water to the MAX water level mark, bring to boil and discard the
boiling water
– do this twice. This will ensure that any residues left over from the manufacturing process
are completely removed.
How to use your kettle:
•
Ensure the power switch is in the OFF position.
•
Fill the kettle with water to your desired level. Make sure not to fill above the MAX level mark as
water may eject while it boils.
•
Still in the OFF position, connect the power supply cord to a power outlet of the same voltage
and frequency as outlined on the rating label.
•
Switch the kettle ON
– the power indicator light will light up.
•
The blue lamp lights up to indicate that the kettle is on. When the water has boiled, the kettle will
switch off automatically and the blue lamp will shut off.
Caution:
Ensure that the kettle is switched off before taking it off the power base.
•
After the water has come to a boil, wait a moment until the water has stopped simmering.
