BEFORE FIRST USE
1. Remove all packaging.
2. Wash the Grill & Griddle Plates, Drip Tray, and Water Tray in warm
soapy water or in the dishwasher to remove any residue from the
manufacturing process.
Never use any metal objects, scouring pads or harsh abrasive
cleansers on the cooking surface.
3. Wipe the Base, Control Panel, and Element with a damp cloth and dry
thoroughly with paper towels before use.
NEVER IMMERSE THE CONTROL PANEL, ELEMENT, FAN, OR
THE POWER CORD IN WATER OR ANY OTHER LIQUID.
4. Before cooking for the first time, the non-stick Cooking Plates must
be ‘seasoned’. Brush a small amount of oil, butter or margarine
on the Cooking Plates and wipe off excess with a paper towel. Your
appliance is now ready to use.
ASSEMBLY
1. Always unplug the unit before assembly and disassembly.
2. Place the Base on a flat, level surface.
3. Fill the Water Tray with water and place in the bottom of the Base.
NOTE: Do not fill the Water Tray above the MAX fill line.
4. Place the Drip Tray on the unit, aligning the arrows on the Drip Tray
with the arrows on the Base.
NOTE:
The unit will not operate if the Drip Tray is not installed
correctly on the Safety Cut Off Switch.
5. Place the Control Panel/Element on the unit.
6. Place the Grill or Griddle Plate on top of the Element.
HOW TO USE
1. Place the unit on a flat, level surface, close to a 120 Volt wall outlet.
2. Follow the Assembly Instructions listed above.
3. Ensure the Water Tray is filled with water. NOTE:
The Water helps
with the smoke extraction. Always use the Water Tray when cooking.
Do not move or hit the unit during use as this will cause water to spill
inside and could cause damage to the unit.
4. Connect the Power Cord to the Grill and then plug into the wall outlet.
The display will light up for 1 second and then the Red Power Light
will begin flashing. The unit is now in standby mode.
5. Press the Power Button to turn the unit on.
6. Press the Fan Button to turn the Fan on.
NOTE:
Do not operate the Grill without the fan on as it will cause
grease to build-up inside and can affect performance.
7. Select the desired temperature by pressing the Temperature Increase
arrow.
4
