SNOWJOE sunjoe 24V-DD-CT, Руководство оператора

Страница: 1 / 52

© 2020 by Snow Joe
®
, LLC
All rights reserved. Original instructions.
SAVE THESE INSTRUCTIONS
1
EN
A Division of Snow Joe
®
, LLC
Model 24V-DD-CT
Form No. SJ-24V-DD-CT-880E-MR1
R
OPERATOR’S MANUAL
CORDLESS DRILL/DRIVER – TOOL ONLY
24-VOLT MAX* | 2-SPEED
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
General Safety
m
WARNING!
When using the drill/driver basic safety
precautions should always be followed to reduce the risk of
fire, electric shock, and personal injury. These include:
Work Area Safety
1. Keep work area clean and well-lit – Cluttered, dark
areas invite accidents.
2. Keep children, bystanders, and pets away –
All spectators, including pets, should be kept a safe
distance away from the work area.
3. Do not operate power tools in explosive atmospheres –
Such as in the presence of flammable liquids, gases, or dust.
Power tools create sparks which may ignite the dust or fumes.
Electrical Safety
1. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators – There is an increased risk of electric shock
if your body is earthed or grounded.
3. Do not expose power tools to rain or wet conditions – Water
entering a power tool will increase the risk of electric shock.
4. Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
6. If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
Personal Safety
1. Stay alert – Watch what you are doing. Use common
sense. Do not operate the drill/driver when you are tired,
or under the influence of alcohol or drugs.
2. Dress properly – Do not wear loose clothing or jewelry.
They can get caught in moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
3. Avoid unintentional starting – Do not carry the drill/driver
with your finger on the trigger. Make sure the switch is off
before connecting the drill/driver to power source.
4. Do not overreach – Keep proper footing and balance at
all times. Proper footing and balance enable better control
of the cordless drill/driver in unexpected situations.
5. Use personal protective equipment – Always wear eye
protection. Protective equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
6. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. – Use of dust collection
can reduce dust-related hazards.
7. Do not use on a ladder or unstable support –
Stable footing on a solid surface enables better control of
the power tool in unexpected situations.
Tool Use and Care
1. Do not force the tool – It will perform better with less
likelihood of personal or mechanical injury if it is used at
the rate for which it was designed.
2. Do not use drill/driver if switch does not turn on or off
– The drill/driver that cannot be controlled with the switch
is dangerous and must be repaired.
3. Disconnect the plug from the power source and/or
battery pack from the drill/driver before making any
adjustments, changing accessories, or storing the
drill/driver – Such preventive safety measures reduce risk
of starting the power tool accidentally.
4. Store idle drill/driver out of reach of children or other
untrained persons – Drill /driver is dangerous in the hands
of untrained users.
5. Maintain cordless drill/driver – Check for misalignment
or binding of moving parts, breakage of parts, and any
other condition that may affect the drill/driver's operation.
If damaged, have the drill/driver serviced before using.
Many accidents are caused by poorly maintained tools.