SNOWJOE sunjoe 24V-DD-CT, Руководство оператора

Страница: 7 / 52

7
Technical Data
Motor ............................................................................... 300 W
Battery Voltage Max* ................................................... 24V D.C.
No Load Speed .................. Low – 350 rpm | High – 1400 rpm
Torque ....................................................................... 265 in-lbs
Speed Settings ............................................................. 2-speed
Drill Bit Size Max ............................................... 0.5 in. (13 mm)
Double-ended Bit ........................ S2 & PH2 0.25 in. (6.35 mm)
Chuck Size ....................................................... 0.5 in. (13 mm)
Chuck Type .................................................................. Keyless
Clutch Settings .................. 23 screw settings + 1 drill setting
Selector Settings ......................................... F reverse
LED Light ........................................................................ 1 watt
Net weight ........................................................ 2.9 lbs (1.3 kg)
*Initial no-load voltage, when fully charged, peaks at 24 volts; nominal voltage
under typical load is 21.6 volts.
Unpacking
Carton Contents
• Cordless drill/driver
• Double-ended driver bit
• Manual with registration card
NOTE: In order to operate this cordless drill/driver you will
need iON+ 24V System batteries and chargers. See page 14 for
battery options and specifications, or visit sunjoe.com.
1. Carefully remove the cordless drill/driver and check to see
that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new cordless
drill/driver. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils,
or small parts. These items can be swallowed and pose a
suffocation risk!
Battery Pack Operation
The equipment is powered by a lithium-ion battery. The battery
pack is completely sealed and maintenance free.
Battery Charge Level Indicator
The battery pack is equipped with a push button for checking
the charge level. Simply press the push button to read off the
battery charge level from the LEDs of the battery indicator:
• All 3 level monitoring LEDs are lit: Battery charge level
is high.
• 2 level monitoring LEDs are lit: Battery charge level is
decreasing. Stop work as soon as possible.
• 1 level monitoring LED is lit: Battery is flat. Stop work
IMMEDIATELY and charge the battery. Otherwise the
battery’s service life will be greatly shortened.
NOTE: If the charge level button does not appear to be
working, insert the charger and charge as needed.
NOTE: Immediately after using the battery pack, the charge
level button may display a lower charge than it will if checked
a few minutes later. The battery cells “recover” some of their
charge after resting.
In order to operate this cordless drill/driver you will need
an iON+ 24V System battery and charger. See page 14 for
battery and charger options and specifications, or for more
information visit sunjoe.com.
TOOL ONLY
B CHARGER SOLD SEPARATELY
Charge level button
The battery is at 30% capacity
and requires charging
The battery is at 60% capacity
and requires charging soon
The battery is at full capacity
Light Indicators Lights