13.Do not operate the unit for longer than 2 hours. If longer use is
necessary, unplug from the wall outlet and allow to cool for
approximately 30 minutes. Dispose of any waste from Drip Tray and
Water Tray before reusing.
CARE AND CLEANING
1. Turn all controls off then unplug the unit from the wall outlet and allow
to cool completely.
2. Remove the Power Cord from the Grill socket. If necessary, wipe the
Control Panel and Cord with a damp cloth.
IMPORTANT: NEVER IMMERSE THE CONTROL PANEL,
ELEMENT OR THE POWER CORD IN WATER OR ANY OTHER
LIQUID.
3. Remove the Grill & Griddle Plates, Drip Tray, and Water Tray and
dispose of any waste.
4. Wash the Grill & Griddle Plates, Drip Tray, and Water Tray in warm
soapy water or in the dishwasher.
NOTE:
For stubborn spots, use a soft plastic mesh pad or other
products that are ‘safe for cleaning non-stick surfaces’. Rinse with
clear water and dry thoroughly. Never use any metal objects, scouring
pads or harsh abrasive cleansers on the cooking surface.
5. Remove the Fan after each use. Clean by turning the unit
upside down. Remove the Fan Cover and pull the Fan upward. It is
recommended to wipe the Fan exterior with a damp cloth and the Fan
interior with cotton swabs. Place the Fan back in place by aligning the
Fan’s wire leads with the holes in the base.
6. After each thorough cleaning, the Grill and Griddle Plates should be
seasoned. Brush the cooking surface with a light coating of vegetable
oil. Allow the oil to remain on the surface for a few minutes, then wipe
with a paper towel.
7. All servicing, other than cleaning, should be performed by an
authorized service representative. See Warranty section.
NOTE: With repeat use, the non-stick coating on the grill and griddle
may change color. This is normal and will not affect the non-stick
properties.
7
