To Lock
1. Close the Lid.
2. Slide the Storage Lock Plate to the front
of the Grill, covering the Locking Tab.
3. Turn the Top Plate Adjusting Knob clockwise until tight.
Top Plate Adjusting Knob
To adjust the height of the Top Grilling Plate while cooking, place food on grill.
Lower the Top Grill Plate to the desired height. With your right hand, turn the Top
Plate Adjusting Knob clockwise until tight. If you wish to raise or lower the Top
Plate, turn the Top Plate Adjusting Knob counterclockwise to loosen and move
the Top Plate.
Removing the Grill Plates
NOTE:
Never remove the Grill Plates when the Grill is hot.
Top Grill Plate:
Place your thumbs on the plastic
housing and your index fingers on the tabs of the Top
Grill. Pull forward with your index fingers while
pushing with your thumbs. The Top Grill plate will
pop out of the locked position.
Bottom Grill Plate:
Place your thumbs on the plastic
housing and your index fingers on the tabs of
the Bottom Grill Plate. Pull up with your index fingers
while pushing down with your thumbs. Grill plate will
pop out of locked position.
Assembling the Grill Plates
Top Grill Plate:
Slide the two tabs at the back edge
of the Top Grill Plate into the holes in the inside hinge.
Squeeze the Top Grill Plate and the Cover
of the Grill together until it locks into place.
Bottom Grill Plate:
Slide the two tabs at the back
edge of the Bottom Grill Plate into the holes in
the outside hinge. Press down until the Bottom Grill
Plate locks into place.
6
SAL6-486 Booklet Salton Grill HG_1025 EN_V2.qxd 6/29/06 3:51 PM Page 6
