16.Do not use Kettle without the Lid in place.
17.Scalding may occur if the Lid is opened while the Kettle is hot.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
GROUNDED PLUG
To reduce the risk of electric shock this appliance has a grounded plug
(2 blades and 1 pin). If the plug does not fit fully into the electrical outlet
contact a qualified electrician. Do not modify the plug in any way or use
an adaptor.
BEFORE FIRST USE
1. Read all instructions carefully and keep them for future reference.
2. Remove all packaging.
3. The Aquascreen® Filter has been installed in the spout of the Kettle
during production. If it has been dislodged during shipping, check
inside the Kettle or in the box for the Filter. Install before using the
Kettle (see Care & Cleaning section).
4. Plug the Power Base into a 120V AC wall outlet.
5. Fill the Kettle with 1 liter (4 cups) of cold tap water, place on the Power
Base and press the On/Off Switch to the On position and bring to a
boil.
6. Once water has boiled, open the cover and add 500 ml (2 cups) of
white vinegar. Let stand for at least 1 hour or overnight. Discard
water and vinegar solution.
7. Fill the kettle to the MAX fill line with cold tap water. Bring to a boil
and discard. Repeat.
8. The kettle is now ready to use.
IMPORTANT NOTES:
• DO NOT remove or install the filter when the Kettle is hot.
• DO NOT use the kettle without the filter in position:
- This may allow water to spit out when boiling
- The kettle may remain in the boil cycle too long once the water has
boiled
- The kettle may not shut off
3
