OPERATION
1. Plug the Refrigerator into a 120 volt AC
wall outlet.
2. Set the Temperature Dial to MAX for 2 hours
before filling the refrigerator.
3. After 2 hours, adjust the Temperature Dial between
the MIN and MAX markings. The Refrigerator will automatically
maintain the temperature level you select. The MED setting
should be appropriate for most needs.
NOTE:
The interior light may blink if you reset the temperature knob
to a level warmer than the actual interior level. This indicates that
it is actively warming and is normal.
CARE AND CLEANING
1. Unplug the refrigerator and remove the food and shelves.
NOTE:
Failure
to unplug the refrigerator could result in electric shock or personal injury.
2. This model uses a thermoelectric cooling system with an automatic
defrosting system so there is no need to defrost manually.
3. Wipe the inside of the Refrigerator and the Door Gasket with a cloth
or sponge dampened in a warm water and baking soda solution, 60 ml
(2 tbsp) baking soda to 1 litre/quart of water.
4. Wash the shelves with mild detergent.
5. The exterior should be cleaned with a soft cloth dampened in mild
detergent and warm water.
6. Wring excess water out of the cloth before cleaning any areas that have
the controls or electrical parts.
7. Do not use abrasive cleansers, which can damage or scratch the finish.
8. Clean Door Gaskets every three months. Gaskets must be kept clean and
pliable to assure a proper seal.
5
SAL7-521 Booklet Refrigerator CF-2020,21,28_EN_VF LR.qxd 05/04/07 16:51 Page 5
