G
B
5
Step 2: Enter Your Personal Data
To change to st, kg or lb follow ‘Weight Reading Only’ sequence above.
1. Press
ON/SET
to activate the set-up procedure.
2. The user number flashes. Select a user number between 1-4 (please note memory 0 is for a
guest and is not saved) using
▲
and
▼
buttons. Press
ON/SET
button to confirm.
3. Male or female icon flashes. Adjust gender using
▲
and
▼
buttons. Press
ON/SET
button
to confirm.
4. Height flashes. Adjust height using
▲
and
▼
buttons. Press
ON/SET
button to confirm.
5. Age flashes. Adjust age using
▲
and
▼
buttons. Press
ON/SET
button to confirm.
6. Fitness level flashes. Adjust fitness level using
▲
and
▼
buttons. Press
ON/SET
button
to confirm.
7. The user number flashes.
8. Press
START
button.
9. Wait while scale confirms user settings and then displays zero. Allow scale to switch to
clock mode.
10. Repeat procedure for a second user, or to change user details.
Note:
To update or overwrite the memorised data, follow the same procedure, making changes
as required.
Weight & Body Analysis Readings
The scale can store up to 50 results. The bar chart icon on the scale display indicates the user
memory status.
To change to st, kg or lb follow ‘Weight Reading Only’ sequence above.
Position the Salter MiBody on a flat level surface.
1. Press
ON/SET
button.
2. Select your user number using
▲
and
▼
buttons.
3. Press
START
button.
4. Wait while scale confirms user settings.
5. Zero is displayed.
6. Step on to scale with BARE FEET.
7. Your weight is displayed, followed by your BMI, body fat, body water and BMR.
8. Your weight is displayed again.
9. Your results are saved to the scale memory.
10. The scale returns to clock mode.
Note:
If
FULL
is displayed then the memory is full. You need to transfer your results to the USB
memory stick, otherwise your earliest results will be overwritten.
