OWNER’S MANUAL V112019 ENGLISH
M-9590 RECUMBENT BIKE KOR
This manual can be downloaded from the customer area on
www.salter.es
STEP 6 – Console Battery Assembly
a. Loosen the
Screw (M3x10mm)(142)
at the bottom on the console by using the combination wrench to open the
Battery Door (45).
b. The
Console (44)
operates with FOUR AA rechargeable batteries, four batteries are included in the hardware
box.
c. The machine is suitable for
Nickel-Metal Hybrid/NI-MH
rechargeable batteries only.
d. Install rechargeable batteries into the console.
e. Attach the
Battery Door (45)
onto the back of the
Console (44)
with the
Screw (M3x10mm)(142).
STEP 7 – Upper Handlebar Assembly
Insert the
Upper Handlebar (46)
into the
Upright Post (48)
and secure with 6pcs
Bolts (M8xp1.25x16mm)(167)
.
STEP 8 – Connection Wire and Console Assembly
a. Plug the
Connection Wire A (108)
into the
Connection Wire B (109).
Be careful not to pinch the wires.
b. Plug the
Pulse Sensor Wire A (111)
into the
Pulse Sensor Wire B (112).
Be careful not to pinch the wires.
c. Place the
Console (44)
onto the
Upright Post (48)
and secure with 4pcs
Bolts (M5xp0.8x15mm)(147)
.
STEP 9 – Handlebar Decoration Cover Assembly
Attach the
Front Handlebar Decoration Cover (53)
and the
Rear Handlebar Decoration Cover (54)
to the
Upright Post (48)
and secure with 3pcs
Screws (M4x20mm)(139)
and 3pcs
Bolts (M5xp0.8x15mm)(147)
.
NOTE: To prevent from any damages, general batteries and other type of batteries are not
allowed
