OWNER’S MANUAL V062023 ENGLISH
M-9630/L ELLIPTICAL FENX
This manual can be downloaded on
www.salter.es
ROLLING
a.
SET TIME:
1. After the
ENTER
button, the following
LED will
display
the
TIME
function mode will appear with the display flashing “0”.
2. Use
UP (▲)
or
DOWN (▼)
button to select your
workout
TIME. (5 ~ 99 MINUTE; 1 MINUTE INCREMENT).
3. Press the
ENTER
button to confirm the value of
TIME.
TIME:
Count Up: If a target time was not selected,
TIME
will count up
from 0:00 to maximum 99:59 minutes.
Count Down: If you have set the target time
(5 TO 99; 1
MINUTE INCREMENT)
, the console will count down from that
selected target time down to 0:00.
b.
SET DISTANCE:
1. After the
ENTER
button, the following
LED will
display
the
DISTANCE
function mode will appear with the display flashing
“0”.
2. Use
UP (▲)
or
DOWN (▼)
button to select the desired
DISTANCE. (0 ~999 KM/MILE; 1 KM/MILE INCREMENT).
3. Press the
ENTER
button to confirm the value of
DISTANCE.
DISTANCE:
Shows the distance traveled (Miles or Kilometers) up to a
maximum of 999.9.
Count Down: If you have set the target distance
(0 TO
999KM/MILE; 1 KM/MILE INCREMENT)
, the console will
count down from that selected target distance to 0.
Display Range: 0.00~999.9 KM/MILE.
c.
SET CALORIES:
1. After the
ENTER
button, the following
LED will
display
the
CALORIES
function mode will appear with the display flashing
“0”.
2. Use
UP (▲)
or
DOWN (▼)
button to select the desired
CALORIES. (10 ~ 990 KCAL; 10 KCAL INCREMENT).
3. Press the
ENTER
button to confirm the value of
CALORIES.
CALORIES:
Shows the current energy (calories) burned.
Count Up: If the target calories were not selected,
CALORIES
will count up from 0 to 999 KCAL.
