OWNER’S MANUAL V062023 ENGLISH
M-9630/L ELLIPTICAL FENX
This manual can be downloaded on
www.salter.es
1. After the
ENTER
button, the following
LED will
display
the
DISTANCE
function mode will appear with the display flashing
“0”.
2. Use
UP (▲)
or
DOWN (▼)
button to select the desired
DISTANCE. (0 ~999 KM/MILE; 1 KM/MILE INCREMENT).
3. Press the
ENTER
button to confirm the value of
DISTANCE.
DISTANCE:
Shows the distance traveled (Miles or Kilometers) up to a
maximum of 999.9.
Count Down: If you have set the target distance
(0 TO
999KM/MILE; 1 KM/MILE INCREMENT)
, the console will
count down from that selected target distance to 0.
Display Range: 0.00~999.9 KM/MILE.
e.
SET CALORIES:
1. After the
ENTER
button, the following
LED will
display
the
CALORIES
function mode will appear with the display flashing
“0”.
2.
Use
UP (▲)
or
DOWN (▼)
button to select the desired
CALORIES. (0 ~ 990 KCAL; 10 KCAL INCREMENT).
3. Press the
ENTER
button to confirm the value of
CALORIES.
CALORIES:
Shows the current energy (calories) burned.
Count Up: If the target calories were not selected,
CALORIES
will count up from 0 to 999 KCAL.
Count Down: If you have set the target calories
(0 TO 990
KCAL; 10 KCAL INCREMENT)
, the console will count down
from that selected target calories down to 0.
f.
START WORKOUT:
Press
START
button to start exercise.
During workout, the
TENSION LEVEL (1 ~ 20 LEVEL)
is
allowed to adjust at any time by pressing
UP (▲)
or
DOWN
(▼)
button to match your workout goal.
3
”
ENDING THE PROGRAM:
