Declarations of Compliance
United States
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
Canada
This digital apparatus does not exceed the Class A limits for the radio noise emissions from digital apparatus set
out in the Radio Interference Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux
appareils numériques de la Classe A prescrites dans le Règlement sur le brouillage radioélectrique edicté par le
ministère des Communications du Canada.
Manufacturer Salter
Brecknell
Type S100
Corresponds to the requirements of the following EC directives:-
Electro Magnetic Compatibility Directive:
Low Voltage Directive:
EMC 89/336/EEC
LVD 73/23/EEC
The application harmonised standards are:
EN60950
EN50081-1
EN50082-1
A copy of the original signed declaration for this instrument is available from the UK address below.
Contact Information & Technical Support
UK and Europe
Salter Brecknell Weighing
P.O. Box 9533, Smethwick,
West Midlands, B66 2TE.
United Kingdom.
Tel: +44 (0) 870 444 6132
Fax: +44 (0) 870 010 2241
email:[email protected]
www.salterbrecknell.co.uk
USA
Salter Brecknell Weighing Products USA
1000 Armstrong Drive
Fairmont
MN 56031
Toll Free: 800-637-0529
Phone: 507-238-8702
Fax: 507-238-8271
email:[email protected]
www.salterbrecknell.com
Declaration of Conformity
