Salter Brecknell PR-3000 Series, Руководство по эксплуатации

Страница: 5 / 20

5
CHAPTER 2: GETTING STARTED
After unpacking the scale, a small amount of preparation is required before the scale can be
used. All PALLET RUNNER 3000 models are factory tested and calibrated prior to delivery.
1. Remove all packaging from scale.
2. Position the scale on a firm, flat surface.
3. Lower the forks by squeezing the hand control upwards. The hand control is located
at the top of the swivel handle.
4. Turn the scale’s power ON to begin use. (If the display is not at a zero weight reading,
press the Zero key).
5. Slide the Pallet Runner forks under any standard pallet. (For optimum weighing
accuracy, the forks must be at least ¾ of their length under the pallet to be weighed).
6. Engage the lift mechanism by lowering the hand control. It may be necessary to hit
the release button before doing so.
7. Lift the pallet by cranking the handle in an UP/DOWN direction a minimum of 3
complete cycles. Now view the display for the weight value.
NOTE: Your PALLET RUNNER 3000 will automatically shut off after five minutes of non-
use. To change this setting, see Chapter 5.
For best results, be sure to follow these general guidelines:
•
If using the AC adapter, do not share an AC outlet with electrical noise producing
equipment, such as refrigeration units. This includes products with electrical motors
and/or relays.
•
Do not place the scale in an area with changing ambient temperature and/or high
humidity.
•
Do not place the scale in an area with vibrating equipment.
• You may obtain a weight reading while moving, however for the best accuracy a
static weighment is advised.