10
CHAPTER 5: SCALE CONFIGURATION
5.1
SCALE CONFIGURATION OVERVIEW
The scale contains two main setup menus: The User (“A”) menu - which configures the
serial communication port and enables some user options - and the Factory Setup (“F”)
menu.
5.2
USER (“A” & “F”) MENUS
5.2.1 ENTERING THE USER MENU “A” AND “F”
1. Power off the indicator by pressing and holding the down ZERO/OFF key for 3
seconds.
2. Remove the top digital display cover and find the black switch. The switch is
located on top of the silver canned A/D converter. (Refer to Figure 5.1 for switch
location)
3. Place the switch in the down position as shown at right.
4. Power on the indicator by pressing the ON key. The indicator shows ” F 1” to
indicate that you are in Setup Menu mode.
CANNED A/D
CONVERTER
SETUP
SWITCH
Figure 5-1: PALLET RUNNER 3000 Main Circuit Board Overview
5.2.2 NAVIGATING IN THE A & F USER MENUS
Use the directional keys shown in Figure 5-2 to move around in the A and F User
Menus.
1.
To move to the selection level, press the ZERO/OFF (down) key once. The
current saved selection is shown.
2.
To view the available selections for A and F menus, use the TARE (left) or
ON/PRINT (right) key to move through the selection field.
3.
To save a new selection, press the NET/GROSS (Save) key .To exit without
saving, press the UNITS (up) key to return to the A OR F heading.
Содержание PR-3000 Series
Страница 15: ...15...