APD-100 Automatic Powder Dispenser User Instructions
25
5.1 Setting Parameters
5.1.1 User Menu
1.
Use these steps because you pressed the
ENTER
key with
USER
displayed in
above…
BL. ON
or
BL. OFF
is displayed.
BL
stands for backlight. Use this
parameter to turn the display backlight on or off.
2.
Press the
0
key to set the backlight to
BL. OFF
. Press the
1
key to set the
backlight to
BL. ON
. Press the
ENTER
key to accept the displayed choice. The
factory default setting is
BL. ON
…
BZ. ON
or
BZ. OFF
is displayed.
BZ
stands for buzzer. Use this
parameter to turn, on or off, the buzzer that sounds when you press a
key.
3.
Press the
0
key to set the buzzer to
BZ. OFF
. Press the
1
key to set the buzzer
to
BZ. ON
. Press the
ENTER
key to accept the displayed choice. The factory
default setting is
BZ. ON
…
USER
is displayed. This completes the items in the User menu.
4.
Press the
ZERO/EXIT
key to exit the User menu and save the changes made.
OR
you can press the
FAST/^
or
TRICKEL/v
key to toggle to the CONFIG menu
and continue to the next section.
5.1.2 Config(uration) Menu
Refer to
for information on entering Config menu.
1.
With
CONFIG
displayed, press the
ENTER
key…
BALL
is displayed. This is the first in a list of powder types:
BALL, FLAKE, EXTRUD, CUST1, CUST2, CUST3
Each of these powder types can be configured with its own motor speed,
weight percentages at different speeds, error settings and auto-restart
parameter. See the menu in Figure
Figure 5.2 Powder configuration
Содержание APD-100
Страница 1: ...APD 100 Automatic Powder Dispenser User Instructions AWT35 500571 IssueAB March 2011...
Страница 4: ...4 APD 100 Automatic Powder Dispenser User Instructions...
Страница 35: ......
