TROUBLE SHOOTING
Symptom Recommended Action
Not weighing correctly OR
Inaccurate weight. . . . . . . . . . . . Press “ON/OFF (TARE)” key, to zero the scale
before placing an item on the scale.
OR
The scale may need re-calibration.
See calibration instructions, page 5.
Weight fluctuates . . . . . . . . . . . . Press “ON/OFF (TARE)” key, to zero the scale
before placing an item on the scale.
OR
Ensure scale is placed in a stable, level
environment free from vibration.
“Lo” is displayed. . . . . . . . . . . . . Replace the battery.
“Err” is displayed . . . . . . . . . . . . .The weight placed on the scale is over
9 lbs 15.5 ounces. Remove the weight
from the scale.
OR
The weight placed on the scale plus the Tare
weight is over 9 lbs 15.5 ounces. Remove the
weight from the scale.
After pressing the “WT HOLD”
Key and placing a weight on the
scale, the weight will not hold in the
display. The “
:
” continues to
flash. . . . . . . . . . . . . . . . . . . . . . . .Remove weight from scale and place the weight
in the center of the scale.
“- - - -“ is displayed . . . . . . . . . . . . The scale is under zero weight. Press the
“ON/OFF (TARE)” key. If problem is consistent
your scale may require calibration, see page 5.
7
WT HOLD KEY:
This key is used when you are unable to view the displayed weight because an item
is larger that the weight platter and display. Pressing this key will hold the stable
weight in the display.
To use the “Weight Hold” feature:
1.
Remove all items from the scale, making sure the scale is at zero weight.
2.
Press the “WT HOLD” key. The scale will display “
: 0.0”. The “:
” will flash
indicating the weight hold feature is active.
3.
Place an item on the scale, wait two seconds for the weight to become stable.
4.
When the weight becomes stable, the “
:
“ will no longer flash.
5.
Remove the item, from the scale. The weight of the item will be held in the
display.
6.
To remove the held weight, press the “WT HOLD” key.
NOTE: Only the held weight will transmit, when interfacing to a PC.
SLEEP MODE CONFIGURATION
The default setting for sleep mode is Off ( SLP0). The sleep mode can be configured
to On (SLP1) via keyboard. If there is no activity, the scale will turn itself off after 30
seconds.
The sleep mode can be changed, when needed, by the following
instructions:
Function
Scale Response
Remove all weight from the scale
Press and hold the “ON/OFF (TARE) key
and press the “LB-OZ/GRAMS” key once . . . . “SLP0” (OFF)
Press the “LB-OZ/GRAMS” key to scroll
to the next selection . . . . . . . . . . . . . . . . . . . . .“SLP1” (ON)
Press and hold the “ON/OFF (TARE)” key for 5 seconds to accept the
sleep mode setting and exit the configuration mode.
4
