232928 10/19 | 85-001165_INST_A
EXP RUBBER STRAP INSTRUCTIONS
3
For additional product and safety information go to salsacycles.com/safety
3. Route the bottom strap through the lower portion of the
Anything Cage and securely around your cargo, ensuring
both straps sit flat and do not interfere with the wheel,
tire or anything else. Follow assembly instructions on page
one to secure the strap and your cargo.
4. Before riding, ensure both EXP Rubber Straps are buckled and
properly tensioned, and the loose ends are placed through the
strap band (Figs. 13, 14). Ensure that loose strap ends are
facing away from the wheel, and that the strap is positioned
around the load such that if the loose end did come out of the
band, it would flap away from any rotating mass.
5. Ensure that your load does not shift out from under the straps
before riding, and re-check the load periodically during use.
Instructions for use with Salsa EXP Series
Anything Cradle
(See EXP Series Anything Cradle instructions for specifics
of assembly)
1. Use two EXP Rubber Straps with our EXP Series Anything
Cradle Dry Bags or similar dry bags. Loop around the bag and
through the cradle, ensuring that the strap is centered in the
strap groove (Fig. 15).
2. Feed the strap end through the buckle and refer to page one
on instructions for securing the strap (Fig. 16).
3. Ensure both straps sit flat and do not interfere with the wheel,
tire or anything else.
4. Before riding, ensure both EXP Rubber Straps are properly
tensioned, and the loose ends are placed through the strap
band. Ensure that loose strap ends are facing away from the
wheel, and that the strap is positioned around the load such
that if the loose end did come out of the band, it would flap
forward and away from any rotating mass.
5. Ensure that your load does not shift out from under the straps
before riding, and re-check the load periodically during use.
Instructions for Use with Front or Rear Rack
1. Place cargo on top of the rack. We recommend using a dry bag
or stuff sack to keep your load together and to keep hard edges
away from the strap.
2. Using two or more EXP Rubber Straps, wrap the load and feed
strap through deck rack (Fig. 17).
3. Pull the strap tight through the buckle and refer to pages
one and two for instructions on securing the rubber strap.
4. Ensure EXP Rubber Straps are properly tensioned and the
loose ends are placed through the strap bands so that they
do not flap, and re-check periodically during use.
5. Ensure that your load does not shift out from under the straps
before riding, and re-check periodically during use.
Figure 14
Figure 15
Figure 16
Figure 17
Figure 13
