Salora MHS550, Инструкция по эксплуатации

Страница: 29 / 79

DAB MODE
1. FULL SCAN Automatic channel collection: Press ENTER to register all
frequency points and press short for all programs received. The dictionary
order label (short name) is successively saved in the program list of DAB. If
the program list of DAB is empty, DAB mode will always be displayed in DAB
menu mode (in addition, when DAB mode is opened for the first time or the
system is reset and restarted, the device will automatically search and
register channels automatically).
2
.
Manual Tune: Channel collection is carried out at a selected DAB
frequency point and press ENTER to ENTER DAB frequency point selection
after selecting the frequency point, press ENTER(o
r
button on panel) to
ENTER the state of manual channel closing. Then the signal of this
frequency point is displayed. Press MENU key or back key to exit channel.
3 . DRC dynamic gain control: Adjusts the dynamic gain range of DAB. There
are three levels in total: Off Low High Press ENTER (or button on panel)
to select the selected item. There is an asterisk (“*”) in the upper right
4
.
Prune clears invalid programs from the DAB list: this is equivalent to
clearing programs that have no signal after FULL SCAN.
5
.
System DAB System Settings
5
.
1
.
DAB System Language: Press ENTER(or button on panel) to select a
Language. The default Language is English. English Currently has 4
languages: English, German, Italian, and French
.
5 . 2 . Factory Reset DAB System Reset: Press ENTER(or button on Panel)
to select the Reset. After the Reset, all DAB module states are restored to
the Factory default state.
5 . 3 (SW Version) DAB Software version: Press ENTER(or Panel) to view the
DAB software version. Press MENU or Back to return to the DAB software
version
If no operation is performed, the system automatically exits the menu after
DAB program name show: Long label
1. Signal available: Press INFO key to view relevant information of DAB
programs in sequence.
1.1. DLS: Text message, if not, playing is displayed.
1.2. Signal Strength:
1.3. Program Type: Program type, if not, NO PTY is displayed
1.4. Ensemble Name:
8