Salora 32LED7100C, Руководство по эксплуатации

Страница: 59 / 99

English - 57 -
Press “ ” button to set timers on an event. Programme
timer function buttons will be displayed on the
screen.
Adding a Timer
Press • YELLOW button on the remote control to
add a timer. The following menu appears on the
screen:
Channel : Changes network type by using “ ” or “ ”.
Timer Type : This feature is unavailable to be set.
Date : Enter a date using the numeric buttons.
Start: Enter a starting time using the numeric
buttons.
End : Enter an ending time using the numeric
buttons.
Duration : Displays duration between the starting and
ending time.
Repeat : Sets a timer to be repeated as Once, Daily or
Weekly. Use “ ” or “ ” buttons to select an option.
Press • GREEN button to save the timer. Press RED
button to cancel.
Change/Delete: Controls parental settings on timers.
Editing a Timer
Select the timer you want to edit by pressing “ • ”
or “ ” button.
Press
• GREEN button. Edit Timer menu screen will
be displayed.
When finished with editing, press • GREEN button to
save. You can press “M” button to cancel.
Deleting a Timer
Select the timer you want to delete by pressing “ •
” or “ ” button.
Press
• RED button.
Select • YES by using “ ” or “ ” buttons to delete the
timer. Select NO to cancel.
Configuring Date/Time Settings
Select Date/Time in the Settings menu to configure
Date/Time settings. Press OK button.
Use “ • ” or “ ” buttons to highlight Date / Time.
Date,Time,Time Settings Mode and Time Zone Setting
will be available.
Use “ ” or “ ” buttons to highlight the Time Settings
Mode. Time Settings Mode is set using “ ” or “ ”
buttons. It can be set to AUTO or MANUAL.
When AUTO is selected, Date/Time and Time Zone
options will not be available to be set. If MANUAL
option is selected as the Time Zone can be altered:
• By pressing “ ” or “ ” buttons select Time Zone.
Use “ ” or “ ” buttons to change the Time Zone
between GMT-12 or GMT+12. Date/Time on the top
of the menu list will then change according to the
selected Time Zone.
Changes are automatically stored. Press • “M” to
exit.
Configuring Source Settings
You can enables or disable selected source options. The
TV will not switch to the disabled source options when
“SOURCE” button is pressed.
Select • Sources in the Settings menu and press OK
button.
Press“
• ” or “ ” buttons to select a source.
Use “ • ” or “ ” button to enable or disable the
selected source. Changes are automatically
stored.
Note : YPbPr mode can be used only when you
connect a device that has a YPbPr output through the
PC input with YPbPr to PC cable (not supplied).
(optional)