
-7-
Switching on a zone and setting a power level
NOTE:
A zone must be selected within 1 minute of switching the hob on.
Press the cooking zone plus button (1) - (4) of the zone that you
want to use.
Adjust the zone between power levels 1 and 9, using the plus (9) and
minus (5) buttons. By holding down either of these buttons, the value
on the zone indicator (10) or (11), (12), (13) will adjust up or down.
Switching off a zone
Press the cooking zone, then press the minus button (5) of the zone
that you want to switch off.
Hold the button down until the number in the cooking zone indicator
reaches “0”. After a few seconds, the zone will switch off automatically.
The letter “H” will show in the cooking zone indicator, (see the section
on the “residual heat indicator” below).
Switching off the hob
Once you have switched off all of the cooking zones, you should turn
off the hob.
Press the ON/OFF button (7).
It is possible to turn the hob off at any time by pressing the ON/OFF
button (7).
If you want rapid cooking, select cooking zone, and press button (15),
turn on the hob, adjust the zone between power levels 1 and 9.
If you cancel this cooking program, you should press the button (15)
again.