-6-
USING YOUR APPLIANCE
Before first use
The first time you use your appliance, you will find that the appliance will omit a ‘new appliance’
smell. We suggest removing the new appliance smell by heating your appliance up to clear out
any smells before use. The odour that is often detected during this initial use is due to the
evaporation of substances used to protect the oven during storage and until is installed.
You should switch on one cooking zone at a time, for 5 minutes at the maximum setting.
This will help to eliminate any new smell that exists and evaporate any humidity that has
formed on the heating elements during transit.
Do not burn off more than one zone at once.
You must place a saucepan filled half full with cold water on each zone as you burn it off.
Touch controls
All operations are performed by means of the touch controls that can be found on the
control panel.
Each touch control has a visual display that corresponds to it.
Switching the hob top on
Press the ON/OFF button (7) to switch on the appliance.
The hob will beep once and all of the cooking zone indicators will light
briefly, then go out.
This means that the hob has entered stand-by mode.