Salicru ILUEST NE Series, Руководство пользователя и эксплуатации

Страница: 29 / 60

- 29 -
• Dry contacts The electrical contacts are controlled parts that they are connected or discon-
nected to our receivers (coils, lights, motors, etc.). Those contacts are located in
the contact chambers and they are turned on by different systems, i.e. buttons,
switches, relays, etc.
• Harmonic currents They are currents added to the fundamental frequency of a predetermined sine-
wave. It is named in this way when these harmonic currents are distorting the
original wave dueto different reasons.
• Star Standard connection type of the three phase transformers, which has a cable that
makes the neutral function.
• Phase Each one that the three phase system has: R, S and T, or single phase: R.
• Outdoor Name used to describe the features of the enclosure, according to its protection
degree, when it is placed outdoors.
• Relay interface Communication port of the equipment with the environment, it is normally made by
dry contacts .
• Static switch Electrically speaking, it is an electronic switch without any physical movement and it
is based on a silicon chip with particular features.
• IP54 Protection degree ready to support the weather inclemencies.
• Led Light Emitting Diode that irradiates light when it is polarised properly.
• Circuit Breaker It is a combination of thermal and magnetic switch, which can trip with both magni-
tudes combined.
• CE marking Certificate that all electrical equipment must pass in Europe. All the manufacturers
has capacity to be certified by himself.
• Neutral In a poliphase system, it is the point that in the foreseen operation, has the same
potential difference, in relation to each one of the phases of the system.
• Telemanagement pack Optional Pack, which has been designed to establish a local and/or remote
communication with the ILUEST. It is composed by a PCB, built in the equipment and
management software.
• Pin Usually, it is the numbered contact in the integrated circuits.
• Timer It is a clock with the feature to temporize the activation of one or several contacts.
• Astronomical Clock It is a clock with an algorithm inside, where setting the latitude and longitude of a
geographic point, it saves the sun rise and sunset of every day in one year. Usually,
it is used to start up or shutdown the lights in an accurate way.
• RS485 Transmission system of communication, in which two twisted cables will establish
the communication with an established address.