Salford BBI MAGNASPREAD Скачать руководство пользователя страница 4

FT TRUCK MT 

4

WARRANTY 

Barron & Brothers International warrants all products manufactured by it to be free from defects 
in material and manufacturing at the time of shipment AND for an additional period of One 
Hundred Eighty (180) days, from the date invoiced to our direct customer or the dealer’s 
customer AND provided the total period does not EXCEED One (1) Year from the date invoiced 
to the dealer.  On parts manufactured by another vendor (i.e., motors, pumps, axles, etc.), the 
parts will be subject to the original manufacturer’s warranty AFTER expiration of Barron & 
Brothers International’s One Hundred Eighty Day (180) Warranty. 

Barron & Brothers International’s warranty SHALL BE VOID AND NOT APPLY to any 
product which has been subject to misuse (including but not limited to overloading), 
misapplication, neglect (including but not limited to improper maintenance), accident, improper 
installation of parts, modification of the unit, improper adjustment, or improper repair of the unit.  
All parts to be warranted by Barron & Brothers International must be returned to the factory for 
inspection and final disposition. 

NOTE: THE PART ON QUESTION MUST BE RETURNED WITHIN 30 DAYS FOR 
CREDIT TO BE ISSUED!! 

Barron & Brothers International’s liability for its equipment, whether due to breach of warranty, 
negligence, strict liability, or otherwise, is LIMITED to providing a replacement part(s) in 
exchange for the defective part(s) AND Barron & Brothers International will not be liable for 
any injury, loss, damage, or expense, whether direct or consequential, including but not limited 
to loss of use, income, profit, or production, OR the increased cost of operation. 

PARTS 

Use only genuine Barron & Brothers International Parts! 
Order them from the 

Authorized Dealer

 in your area

When placing an order, please have available: 

1. The pertinent model and serial number of the spreader.
2. The part name, part number, and the quantity required.
3. The correct street address to where the parts are to be shipped and the carrier if there is a

preference.  We cannot ship to P.O. boxes.

Shipping Damage 

Claims for shortages or errors must be made immediately upon receipt of goods.  When broken 
or damaged goods are received, a full description of the damage must be made to the carrier 
agent on the freight bill.  If this is insisted upon, full damage can always be collected from the 
transportation company.  Please contact BBI as soon as possible after carrier is notified. 

If your claims are not being handled by the transportation company to your satisfaction, please 
contact our Customer Service Department at 1-800-282-3570 for assistance. 

Содержание BBI MAGNASPREAD

































Отзывы: