FT TRUCK MT
22
LUBRICATION
All bearings are prelubricated with grease. The grease in a
bearing acts to prevent excessive wear of parts, protects ball
races and balls from corrosion and aids in preventing excessive
heat within the bearing. This is even more critical when used
in dusty or moist conditions. It is very important the grease
maintains its proper consistency during operation. It must not
be fluid and it must not channel.
Bearings should be lubricated with a #2 Lithium Base grease formulated from a high quality
mineral oil with rust and oxidation inhibitors. Examples are Shell Alvania #2, Mobil Mobilux
#2, and Texaco Multifak #2.
Pump the grease slowly until it forms a slight bead around the seals. This bead indicates
adequate lubrication and also provides additional protection against the entrance of dirt.
Be sure all fittings are thoroughly cleaned before grease is injected. Points to be lubricated by
means of grease gun have standard grease fittings.
1) Pillow Block Bearings
2) U-Joints
3) Rear Roller Bearings
4) Gate Rod Hangers
5) Front Rollers
6) Flow Divider Bearing
and Bushing
MAINTENANCE
