Salda VSA 3.0 Series, Монтаж и инструкция по установке

Страница: 2 / 12

2 | EN VSA 3.0_VSA EKO v2019.04
SYMBOLS AND MARKING
Product name
Nominal voltage frequency
Max.current
Max.power consumption
Protection class
/ 000 0 VAC
00.00 A
0.00 kW
IP 00
/ 0 /Hz
Made in Šiauliai, Lithuania
SKU000000
LN: LN000000 2019.01.01
1
4
5
2
6
3
Figure 1.1 - Technical label
1 - Logo; 2 - Product code (SKU); 3 - Product name; 4 - Technical data; 5 - Production place; 6 - Lot number and production date.
Techninis
lipdukas
XXX GAMINIO PA VADINIMA S
Nominal voltage frequency
Max.current
Max.power consumption Protection class
Weight
/ xxx/xx VAC/Hz
x.xx A
x.xx kW IP xx
xx kg
Made in Šiauliai, Lithuani a
FAN000040
BN:xxxxxx
2019/01/01
Techninis
lipdukas
Product name
Nominal voltage frequency
Max.current
Max.power consumption
Protection class
/ 000 0 VAC
00.00 A
0.00 kW
IP 00
/ 0 /Hz
Made in Šiauliai, Lithuania
SKU000000
LN: LN000000 2019.01.01
Product name
Nominal voltage frequency
Max.current
Max.power consumption
Protection class
/ 000 0 VAC
00.00 A
0.00 kW
IP 00
/ 0 /Hz
Made in Šiauliai, Lithuania
SKU000000
LN: LN000000 2019.01.01
Product name
Nominal voltage frequency
Max.current
Max.power consumption
Protection class
/ 000 0 VAC
00.00 A
0.00 kW
IP 00
/ 0 /Hz
Made in Šiauliai, Lithuania
SKU000000
LN: LN000000 2019.01.01
Product name
Nominal voltage frequency
Max.current
Max.power consumption
Protection class
/ 000 0 VAC
00.00 A
0.00 kW
IP 00
/ 0 /Hz
Made in Šiauliai, Lithuania
SKU000000
LN: LN000000 2019.01.01
Product name
Nominal voltage frequency
Max.current
Max.power consumption
Protection class
/ 000 0 VAC
00.00 A
0.00 kW
IP 00
/ 0 /Hz
Made in Šiauliai, Lithuania
SKU000000
LN: LN000000 2019.01.01
Figure 1.2 - VSA 3.0/VSA EKO technical lable place
Figure 1.3 - Indication for air flow direction.
GENERAL INFORMATION
Prior to the installation of the device it is necessary to read all the material presented in this document.
The device installation can be performed only by trained and qualified staff, familiar with this type of equipment installation, verification, maintenance
and required tools for installation works.
If the provided material is unclear or there are any doubts concerning safe installation and use, please contact the manufacturer or his representative.
The device can only work under following conditions.
It is strictly prohibited to use the device not for its purpose or not under provided working conditions without receiving a written permit from the
manufacturer or its representative.
In the event of failure, it must be reported to the manufacturer or its representative with the description of the failure and provide data on product label.
In the event of a failure, it is prohibited to repair, disassemble the device without a written consent from the manufacturer or its representative.
The device can be disassembled, repaired or modified only after receiving a written consent from the manufacturer or its representative.
Before using the products manufactured or supplied by the company, the clients must ensure the products are compatible with the selected en -
vironment.
TRANSPORTATION AND STORAGE
All devices are packed in the factory to withstand normal transportation conditions.
When unpacking the device, check if it has not been damaged during the transportation. It is prohibited to install damaged equipment!!!
The package is only a protection measure!
When unloading and storing the equipment, use proper lifting equipment to prevent damage and injuries. Do not lift the equipment on power ca -
bles, connection boxes, air collecting or disposal flanges. Avoid shacking and punching overloads. Until the installation, store the devices in a dry
place where relative humidity does not exceed 70% (at 20°C), the average ambient temperature – between 5°C and +30°C. Storage place has to
be protected from dirt and water.
The devices have to be stored and transported only in a horizontal position so that the inlet flange would be at the bottom.
Storing for more than one year is not recommended. When storing longer than one year, it is necessary to verify if the bearings are rotating easily
before the installation (rotate the impeller by hand)
PURPOSE OF THE DEVICE
The device is used in ventilation and air conditioning systems to pull only clean air from the room (free from metal corroding chemicals; aggressive
substances for zinc, plastic, rubber; hard, sticky and fibrous particles).
DESCRIPTION
Fan rotation speed is controlled by changing voltage.
Maintenance undemanding bearings.
Automatic thermo contact engine protection.