Salda Smarty 2X P S300, Монтаж и инструкция по установке

Страница: 11 / 40

EN | 11 SMARTY XP S300 v2022.1
• Before commencing the installation of the unit, please check if all ordered equipment have been delivered. Any variation from the ordered equip-
ment list must be reported to the product supplier.
5.4. PIPING AND INSTRUMENTATION DIAGRAM
Figure 5.4.1. SMARTY XP S300 (* Only heater or preheater can be connected at a time; ** Components connection only with PE1; ***
Components connection only without PE1)
THE LIST OF COMPONENTS
C Plate heat exchanger PV Supply air fan
IF ([WUDFWDLU¿OWHU PF 6XSSO\DLU¿OWHU
IV Exhaust fan TA Extract air temperature sensor
TE Exhaust air temperature sensor TJ Supply air temperature sensor
TL Outdoor air temperature sensor CO
2
CO
2
sensor
RH Air humidity sensor PE1 Electric pre-heater
KE1 Electric heater M2 Outdoor air damper actuator
M1 By-pass damper RC POS8.4420 or POS8.4440 remote control panel
M3 Exhaust air damper actuator AQ Air quality sensor
Ventilated premises T Temperature sensor
TP Air temperature after pre-heater sensor
POSIBLE PCB INPUTS/OUTPUTS
FA Fire alarm FPP Fireplace protection
H1 Operation indication output H2 Alarm indication output
6\VWHPPRGHVZLWFK )DQVVSHHGVZLWFK
5.5. MOUNTING
• ,QVWDOODWLRQVKRXOGEHFDUULHGRXWE\TXDOL¿HGDQGWUDLQHGVWDႇRQO\
• When connecting air ducts, consider the labels on the casing of the unit.
• Before connecting to the air duct system, the connection openings of ventilation unit should be closed.
•
:KHQFRQQHFWLQJWKHGXFWVWKHDLUÀRZGLUHFWLRQLQGLFDWHGRQWKHGHYLFHKRXVLQJVKRXOGEHREVHUYHG
• 'RQRWFRQQHFWWKHEHQGVFORVHWRFRQQHFWLRQÀDQJHVRIWKHXQLW7KHPLQLPXPGLVWDQFHRIWKHVWUDLJKWDLUGXFWEHWZHHQWKHXQLWDQGWKH¿UVW
• EUDQFKRIWKHDLUGXFWLQWKHVXSSO\DLUGXFWPXVWEH['LQDLUH[KDXVWGXFW['ZKHUH'LVWKHGLDPHWHURIWKHDLUGXFW
• ,WLVUHFRPPHQGHGWRXVHWKHEUDFNHWVDFFHVVRULHV7KLVZLOOUHGXFHWKHYLEUDWLRQWUDQVPLWWHGE\WKHXQLWWRWKHDLUGXFWV\VWHPDQGHQYLURQ -