Salda RIS 700 H EKO 3.0, Инструкция по монтажу и установке

Страница: 9 / 28

EN | 9 RIS 700 H EKO 3.0 v2020.1
5.4. PIPING AND INSTRUMENTATION DIAGRAM
* KE1 - only in electrical version; * KV1 - used in water version; ** Possible to control.
THE LIST OF COMPONENTS
C Plate heat exchanger PV Supply air fan
IF ([WUDFWDLU¿OWHU PF 6XSSO\DLU¿OWHU
IV Exhaust fan TE Exhaust air temperature sensor
TJ Supply air temperature sensor DTJ Extract air temperature and humidity sensor
CO
2
CO
2
sensor PC Computer
KE1 Electric heater M1 By-pass damper
M2 Outdoor air damper actuator M3 Exhaust air damper actuator
TL Outdoor air temperature sensor Ventilated premises
NET 1HWZRUN MB-Gateway 1HWZRUNPRGXOH
TV1 Water heater temperature sensor DX DX cooler
KV1 Water heater* T1 Water heater thermostat*
M4 Water heater circulation pump M5 Water cooler valve motor
RC2 Stouch, Flex or ST-SA-Control remote control panel M6 Water heater valve motor*
* Component/posibility to connect it depends on model.
POSIBLE PCB INPUTS/OUTPUTS
FA Fire alarm H2 Alarm indication output
H1 Working indication output )DQVVSHHGVZLWFK%2267
6\VWHPPRGHVZLWFK67$576723
5.5. MOUNTING
• ,QVWDOODWLRQVKRXOGEHFDUULHGRXWE\TXDOL¿HGDQGWUDLQHGVWDႇRQO\
• When connecting air ducts, consider the labels on the casing of the unit.
• Before connecting to the air duct system, the connection openings of ventilation unit should be closed.
•
:KHQFRQQHFWLQJWKHGXFWVWKHDLUÀRZGLUHFWLRQLQGLFDWHGRQWKHGHYLFHKRXVLQJVKRXOGEHREVHUYHG