background image

EN |

 3

KUB T120_KUB EKO v2019.04

Never touch with wet hands the power supply cables connected to the mains.

Never dip extension cords and plugs in water.

Do not install and use the unit on uneven surfaces or other unstable planes.

Never use this unit in the environment conducive to explosion and containing any aggressive material.

INFORMATION ABOUT THE PRODUCT

DESCRIPTION

Fan box is designed for extracting wet, greased and hot (max 120 

O

C) air. These fans are for commercial kitchen applications. Unsuitable for 

swimming pools, saunas and so on.

Fan speed is controlled by the frequency changer, auto-transformer (only with predicted protection against overload).

Maintenance free bearings.

Automatic thermo contact engine protection.

Fans are not designed for explosive - inclined areas.

Used to exhaust air.

Backward-curved impeller.

Removable grease tray made of stainless steel.

Acoustic wall insulation of 25 mm.

ATTENTION! It is necessary to use filter before the fan.

PURPOSE OF THE DEVICE

Fan kitchen box ins.  is used in ventilation systems to extract air from the room (free from metal corroding chemicals; aggressive substances for 

zinc, plastic, rubber; hard, sticky and fibrous particles).

Fan box insulated is designed for ventilation and conditioning systems to supply/extract to/from a room only clean air (free of chemical compounds 

causing metal corrosion, of substances aggressive to zinc, plastic and rubber, and of particles of solid, adhesive and fibred materials).

DIMENSIONS AND WEIGHT

KUB T120

øD

L

L1

H

A

B

C

m

[mm]

[mm]

[mm]

[mm]

[mm]

[mm]

[mm]

[kg]

355-4L3

355

570

500

500

225

540

420

33

400-4L3

400

740

670

670

240

712

590

55

450-4L3

450

740

670

670

275

712

590

62

500-4L3

500

740

670

670

310

712

590

66

560-4L3

560

870

800

800

355

840

720

98

630-4L3

630

940

865

865

385

905

785

138

KUB EKO

øD

L

L1

H

A

B

C

m

[mm]

[mm]

[mm]

[mm]

[mm]

[mm]

[mm]

[kg]

100-630

510

1000

1000

116

50-355

261

500

500

28

67-400

325

670

670

50

67-500

412

670

670

51

80-560

461

800

800

75

80-630

512

800

800

87

Содержание KUB EKO

















Отзывы: