28
| EN
FANS v2024.1
VSA 3.0 / VSA EKO
•
The device is mounted onto the chimney using accessories: reverse thrust valves, flexible connectors, and connection flanges. They have to
be installed only as shown in
•
The power supply cord has to be pushed through a plastic tube inside the chimney and connected to the fan.
• Attach the fan to the roof chimney.
•
The roof fan is attached to the chimney using screws. It is necessary to use rubber gaskets.
•
When the fan is attached to the chimney, put back the fan cover and screw it with four (4) screws.
Fig. 5.5.21 Mounting and installation
using accessories
Fig. 5.5.22 Mounting
VSV / VSV EKO AL / VSVI EKO AL
•
The device is mounted onto the chimney using accessories: reverse thrust valves, flexible connectors, and connection flanges. They have to
be installed only as shown in
.
•
The power supply cord has to be pushed through a plastic tube inside the chimney.
• Attach the fan to the roof chimney.
•
The roof fan is attached to the chimney using screws. It is necessary to use rubber gaskets.
•
When the fan is attached to the chimney, put back the fan cover and screw it in with screws.
Fig. 5.5.23 Mounting and installation using accessories
Fig. 5.5.24 Cover opening