NZFS 15-15-8000 VisualPet User’s Manual
Iss: VPetNZFS 06/09
Sea Air & Land Communications Ltd.
Page 13 of 23
The
Destination
tab is used to select where a message to the contact is to be delivered.
The
Destinations
box will show a list of installed protocols for message delivery.
The above example has three destinations with only the
Transmitter
option having a contact
entered. The
Transmitter
destination requires the Daviscomm memory location in the
Contact
details
.
The 15-15-9000 Transmitter is programmed to accept the Daviscomm Flex protocol, this means the
transmitter is able to receive messages from VisualPet or directly from the Daviscomm Flex
Receiver.
The function (Level) , Family, Rate, Pager Type are not supported for the Daviscomm Flex
receivers.
The translation from the Daviscomm memory location to an actual Pager RIC is done by the 15-15-
9000, The 15-15 programming also controls the Pager Level .
Once all contact details are entered a click on the
OK
will save the settings.