NZFS 15-15-8000 VisualPet User’s Manual
Iss: VPetNZFS 06/09
Sea Air & Land Communications Ltd.
Page 10 of 23
PDT Ack, Printer Output and Display Message
Control of the PDT Ack relay, content to the Printer or Displaying the message for the current
Contact
is achieved by using the
View as Text
button. By pressing the button a dialog window will
open as below:
Printer Output
is controlled from the line states:
Print=F
This means for the contact selected there will not be any output sent to printer. By changing the
string to:
Print=T
The printer output will be enabled.
Note that if there no “Print=T” or “Print=F” then the default is print output
enabled
PDT Ack
is controlled from the line states:
Ack=F
This means for the contact selected there will not be any acknowledge output on the relay. By
changing the string to:
Ack=T
The PDT Ack relay output will be enabled.
Note that if there no “Ack=T” or “Ack=F” then the default is PDT Ack output
disabled
Display Message
is controlled from the line states:
Display=F
This means for the contact selected the message received will NOT be shown on the main display.
Display=T
Any received message will be displayed.
Note that if there is no “Display=T” or “Display=F” then all messages will be
displayed
Once the Printer, Display and PDT Ack setting are completed click
OK
to save and exit.
The
Close
button bottom right of the
Contacts
window will return user to the Main screen.