BLOCK DIAGRAM
WARNINGS
• The installation of car audio equipment requires special professional skills and experience, which are not dealt with in
this manual. Seek professional assistance if necessary to prevent damaging the unit or motor vehicle. Professional
installation is crucial to reliable operation.
• Failure caused by irresponsible installation and/or connection is not covered by the warranty.
• Make sure that the connections are of proper polarity! Otherwise, the product’s safety valve may activate and the
capacitor may be damaged.
• Only a capacitor that has been charged beforehand should be connected to the circuit!
• Do not connect a fully discharged capacitor to the battery without controller electronics as the sudden current surge
can potentially cause damage and/or injury.
•
Do not short-circuit the capacitor’s terminals
during installation through negligence by contacting them with a
metal tool, for example!
• For making the connections use cabling of a high gauge required by the amplifier’s current demand.
• Make sure the terminal screws are tightened before initial use.
• Do not cover the unit and install it only in well-ventilated areas.
• Protect the unit from direct sunlight, dust, humidity, liquids and shock.
• Avoid temperature extremes.
• Use a soft, dry cloth to clean the unit.
Caution: Risk of electric shock!
Do not attempt to disassemble of modify the unit or its accessories. In case any part is damaged, immediately
power off the unit and seek the assistance of a specialist.
Do not discard with communal waste. At the end of its life, dispose of product at a facility specializing in the collection
of electronic waste. If you have any question or remark in connection with this, contact the seller or local waste
management organization. By doing so, you will protect the environment as well as the health of others and yourself.
SPECIFICATIONS
capacity: . . . . . . . . . . . . . . . . . . . . . . 1,0 FARAD
tolerance. . . . . . . . . . . . . . . . . . . . . . . . . . ± 20%
max. voltage . . . . . . . . . . . . . . . . . . . < 20 V DC
0
max. temperature: . . . . . . . . . . . . . . . . . . < 95 C
internal resistance . . . . . . . . . . . < 0,0016 Ohms
dimensions: . . . . . . . . . . . . . . . . . Ø76 x 260 mm
Voltmeter display (minor deviation possible):
• < 5,7 V: no display • 5,7 V – 9,0 V: Lo (low voltage) display • 9,0V – 16,4 V: operating range • > 16,4 V: Hi (high
voltage) display • > 16,6 V: audible overvoltage indication.